nsa administrators to replace tls

nsa administrators to replace tls

In recent years, there has been a growing concern about online security and privacy. With the rise of cyber attacks and data breaches, the need for stronger and more secure communication protocols has become more urgent. One of the most widely used protocols for securing online communication is Transport Layer Security (TLS). However, with the revelations about the National Security Agency (NSA)’s surveillance programs, there have been calls for the replacement of TLS by NSA administrators. In this article, we will explore the reasons behind this demand and the potential impact of such a replacement.

First, let us understand what TLS is and why it is important. TLS is a cryptographic protocol that ensures secure communication over a network, such as the internet. It provides encryption and authentication mechanisms to protect against eavesdropping, tampering, and message forgery. TLS is widely used for securing online transactions, such as online banking, e-commerce, and email communication. It is also used to secure the connection between a web server and a web browser, indicated by the familiar green padlock in the browser’s address bar.

However, despite its widespread use, TLS has faced criticism for being vulnerable to attacks. The most significant of these is the Man-in-the-Middle (MitM) attack, where an attacker intercepts the communication between two parties and can decrypt, modify, or inject messages. The NSA’s surveillance programs, particularly the PRISM program, have exploited this vulnerability to collect and analyze huge amounts of internet traffic. This has raised concerns about the integrity of TLS and its ability to protect against government surveillance.

Hence, the demand to replace TLS by NSA administrators. It is argued that the NSA, being a leading intelligence agency, has the resources and expertise to develop a more secure communication protocol that is not susceptible to the same vulnerabilities as TLS. Additionally, the NSA’s involvement in the development of a new protocol could provide assurance to users that it will not be compromised by the agency itself.

One possible replacement for TLS could be Quantum Key Distribution (QKD). Unlike traditional encryption methods, QKD uses the principles of quantum mechanics to exchange encryption keys between two parties. This makes it virtually impossible for an attacker to intercept and decrypt the communication. However, QKD has its limitations, such as the requirement for specialized hardware and the restriction to point-to-point communication, making it unsuitable for widespread use on the internet.

Another option is to develop a new version of TLS that addresses the vulnerabilities exploited by the NSA. The Internet Engineering Task Force (IETF), the organization responsible for developing internet standards, has been working on TLS 1.3, which includes improvements to address MitM attacks. However, the development process has been slow, and the new version is yet to be widely adopted.

Aside from the technical challenges, there are also concerns about the impact of replacing TLS. The widespread adoption of TLS has made it a vital part of the internet infrastructure. Replacing it would require a significant effort and could potentially disrupt online services and communication. Moreover, there is a risk of creating a fragmented internet, with some countries adopting the new protocol and others sticking to TLS.

Furthermore, there are concerns about the NSA’s involvement in the development of a new protocol. The agency’s track record of surveillance and privacy violations has eroded public trust, and this could carry over to the new protocol. There are also fears that the NSA could use its involvement to insert backdoors or weaken the protocol to facilitate its surveillance activities.

In response to these concerns, some argue that instead of replacing TLS, efforts should be focused on improving and strengthening the existing protocol. This includes implementing best practices and security measures, such as certificate pinning, to prevent MitM attacks. Additionally, there have been proposals to decentralize the certificate authority system, which is currently responsible for issuing and revoking SSL certificates used in TLS, to reduce the risk of a single point of failure.

Moreover, the replacement of TLS would not address the underlying issue of government surveillance. Even if a more secure protocol is developed, there is no guarantee that the NSA or other intelligence agencies would not find ways to bypass it. The real solution lies in addressing the government’s overreaching surveillance practices and implementing stronger privacy laws and regulations.

In conclusion, while the demand to replace TLS by NSA administrators is understandable, it is not a straightforward solution. The development of a new communication protocol is a complex and challenging task, and the impact of such a replacement on the internet and user trust must be carefully considered. Instead of solely relying on a new protocol, efforts should also be focused on improving the existing one and addressing the underlying issues of government surveillance. Ultimately, the goal should be to strike a balance between security and privacy, and it is crucial to involve all stakeholders in this discussion.

asus router not showing clients

Asus routers are known for their high-quality performance and reliable connection, but sometimes even the best technology can encounter issues. One common issue that users may face is their Asus router not showing clients, which can be frustrating and cause disruptions in their internet usage. In this article, we will discuss the possible causes of this problem and provide some solutions to help you resolve it.

What does it mean when your Asus router is not showing clients?

Before we delve into the solutions, let’s first understand what it means when your Asus router is not showing clients. When you connect a device to your router, it is assigned an IP address, which allows it to communicate with other devices on the network. These devices are referred to as clients. So when your router is not showing clients, it means that it is not able to detect the devices connected to it, and therefore, they cannot communicate with each other.

Possible causes of Asus router not showing clients

1. Network congestion: One of the main reasons why your Asus router may not be showing clients is network congestion. When there are too many devices connected to the router, it can cause a strain on the network, leading to connectivity issues. This can also happen if you have a large number of devices connected to the router at once, such as during a party or a gathering.

2. Outdated firmware: Like any other electronic device, routers also require regular updates to function properly. If your Asus router’s firmware is outdated, it may not be able to detect new devices or show existing ones. This can also lead to slow internet speeds and other connectivity problems.

3. Network settings: Your router’s network settings can also affect its ability to show clients. If the settings are not configured correctly, it can cause connectivity issues and prevent your router from detecting devices.

4. Faulty hardware: A faulty router or network adapter can also be the reason why your Asus router is not showing clients. If the hardware is damaged or malfunctioning, it may not be able to detect devices connected to it.

5. Interference from other devices: Other electronic devices such as cordless phones, baby monitors, and microwave ovens can interfere with your router’s signal, causing connectivity issues. This interference can also lead to your router not showing clients.

Solutions for Asus router not showing clients

1. Restart your router: The first thing you should try when your Asus router is not showing clients is to restart it. Unplug the power cable from the router, wait for a few seconds, and plug it back in. This will give your router a fresh start and may resolve the issue.

2. Update firmware: Check for any available firmware updates for your router and install them. You can do this through the router’s web interface or by downloading the firmware from the manufacturer’s website. Updating the firmware can fix any bugs or issues that may be causing your router not to show clients.

3. Check network settings: Make sure that your router’s network settings are correctly configured. You can access these settings through the router’s web interface. Check the DHCP settings and make sure that they are enabled. DHCP is responsible for assigning IP addresses to devices connected to the network.

4. Remove interference: If you suspect that other electronic devices are causing interference, try moving your router away from them. You can also switch to a different wireless channel on your router to avoid interference from other devices.

5. Check hardware: If none of the above solutions work, check the hardware of your router and the network adapters of the devices that are not showing up. Make sure that they are not damaged or malfunctioning. If they are, you may need to replace them.

6. Reset your router: If all else fails, you can try resetting your router to its factory settings. This will erase all the settings and configurations on your router and give it a fresh start. You can usually find a reset button on the back or bottom of your router. Press and hold it for 10-15 seconds, and then release it. Your router will restart, and you will need to set it up again.

7. Check for network congestion: If you have a large number of devices connected to your router, try disconnecting some of them and see if that makes a difference. You can also try limiting the number of devices that can connect to your router at once through the router’s web interface.

8. Use a wired connection: If you are experiencing connectivity issues with wireless devices, try connecting them to your router using an ethernet cable. This will eliminate any potential wireless interference and give you a more stable connection.

9. Use a different device: If a particular device is not showing up on your router, try connecting a different device and see if it shows up. This will help you determine if the issue is with the device or the router.

10. Contact customer support: If you have tried all the solutions mentioned above and your Asus router is still not showing clients, it’s time to contact customer support. They may be able to provide further assistance and troubleshoot the issue for you.


Asus routers are known for their performance and reliability, but they can encounter issues just like any other electronic device. If your Asus router is not showing clients, it can be frustrating and disrupt your internet usage. However, by following the solutions mentioned in this article, you can troubleshoot the issue and get your router back up and running. Remember to regularly update your router’s firmware and check for any interference from other devices to prevent this issue from occurring in the future.

como bloquear apps en iphone

En la actualidad, los teléfonos inteligentes se han convertido en una parte esencial de nuestras vidas. Con la amplia gama de aplicaciones disponibles en el mercado, nuestros teléfonos se han convertido en una herramienta indispensable para el trabajo, la comunicación, el entretenimiento y mucho más. Sin embargo, a veces podemos encontrarnos con aplicaciones que pueden ser inapropiadas o incluso peligrosas para nosotros o para nuestros hijos. Por esta razón, es importante saber cómo bloquear aplicaciones en nuestro iPhone para mantener nuestra privacidad y seguridad.

Existen varias razones por las que podríamos querer bloquear aplicaciones en nuestro iPhone. Una de ellas es para proteger nuestra privacidad. Hay aplicaciones que pueden acceder a nuestras fotos, contactos y otros datos personales, lo que puede ser una preocupación para muchas personas. Otra razón es para evitar que nuestros hijos accedan a ciertas aplicaciones que podrían ser inapropiadas para su edad. Además, bloquear aplicaciones también puede ser útil en el entorno laboral, ya que puede evitar distracciones y aumentar la productividad.

Afortunadamente, el iPhone cuenta con varias opciones para bloquear aplicaciones y mantener nuestros datos seguros. En este artículo, te explicaremos cómo bloquear aplicaciones en tu iPhone de diferentes maneras.

1. Utilizar la función de restricciones

La forma más sencilla de bloquear aplicaciones en tu iPhone es utilizando la función de restricciones incorporada en el sistema operativo iOS. Esta función te permite restringir el acceso a ciertas aplicaciones y características de tu teléfono. Para activar las restricciones, sigue estos pasos:

1. Ve a “Ajustes” en tu iPhone y selecciona “Tiempo de uso”.

2. Selecciona “Restricciones de contenido y privacidad”.

3. Toca “Activar restricciones” y establece un código de acceso.

4. A continuación, podrás ver una lista de aplicaciones y características que puedes restringir, como la cámara, Siri, FaceTime, entre otras. Simplemente desactiva las que desees bloquear.

5. Para bloquear aplicaciones específicas, selecciona “Aplicaciones permitidas” y desactiva las que quieras bloquear.

Una vez que hayas establecido las restricciones, las aplicaciones bloqueadas no aparecerán en la pantalla de inicio de tu iPhone. Sin embargo, todavía podrás acceder a ellas desde el menú de restricciones ingresando el código de acceso.

2. Utilizar la función de límites de tiempo de uso

Otra forma de bloquear aplicaciones en tu iPhone es utilizando la función de límites de tiempo de uso. Esta función te permite establecer un tiempo límite para el uso de ciertas aplicaciones. Después de alcanzar el límite, la aplicación se bloqueará automáticamente. Para configurar los límites de tiempo de uso, sigue estos pasos:

1. Ve a “Ajustes” en tu iPhone y selecciona “Tiempo de uso”.

2. Toca “Establecer límites de tiempo de uso” y selecciona “Añadir límite de tiempo”.

3. Selecciona las aplicaciones que deseas limitar y establece el tiempo límite.

4. Una vez que hayas establecido los límites, la aplicación se bloqueará automáticamente al alcanzar el tiempo límite.

3. Utilizar aplicaciones de terceros

Si no estás satisfecho con las opciones de bloqueo incorporadas en tu iPhone, también puedes utilizar aplicaciones de terceros para bloquear aplicaciones en tu dispositivo. Estas aplicaciones ofrecen una mayor personalización y opciones avanzadas de bloqueo. Algunas de las aplicaciones más populares son “AppLock”, “Lockdown” y “Secure Folder”.

Estas aplicaciones te permiten bloquear aplicaciones con un código de acceso, huella dactilar o reconocimiento facial. También puedes establecer un horario para bloquear automáticamente ciertas aplicaciones y recibir notificaciones cuando alguien intente acceder a ellas. Sin embargo, ten en cuenta que estas aplicaciones pueden tener un costo o incluir publicidad en su versión gratuita.

4. Utilizar la función “No molestar mientras se conduce”

Otra forma de limitar el uso de aplicaciones en tu iPhone es utilizando la función “No molestar mientras se conduce”. Esta función te permite bloquear notificaciones y llamadas mientras estás conduciendo, lo que puede ser útil para evitar distracciones y mantener la seguridad en la carretera.

Para activar esta función, sigue estos pasos:

1. Ve a “Ajustes” en tu iPhone y selecciona “No molestar”.

2. Desliza hacia abajo y selecciona “No molestar mientras se conduce”.

3. Selecciona “Activar automáticamente” y elige entre las opciones de “Automáticamente” o “Cuando se conecta a Bluetooth del coche”.

4. Una vez activada, esta función bloqueará notificaciones y llamadas mientras estás conduciendo. Sin embargo, puedes permitir llamadas de ciertos contactos en caso de emergencias.

5. Utilizar la función “Modo Restringido” de youtube -reviews”>YouTube

Si tienes hijos que utilizan tu iPhone, es posible que quieras bloquear el acceso a ciertas aplicaciones, como YouTube . Afortunadamente, YouTube cuenta con una función llamada “Modo Restringido” que te permite bloquear contenido inapropiado para niños. Para activar esta función, sigue estos pasos:

1. Abre la aplicación de YouTube y ve a la pestaña de “Biblioteca”.

2. Toca el icono de configuración en la esquina superior derecha.

3. Selecciona “Configuración general” y ve a “Restricciones de contenido”.

4. Toca “Activar” y establece un código de acceso.

5. A continuación, puedes seleccionar el nivel de restricción que deseas aplicar. Además, puedes agregar canales específicos a la lista de canales bloqueados.

6. Una vez que hayas activado el modo restringido, cualquier contenido inapropiado será bloqueado en la aplicación de YouTube.

En conclusión, hay varias formas de bloquear aplicaciones en tu iPhone, ya sea para proteger tu privacidad, mantener la seguridad de tus hijos o aumentar tu productividad. Puedes utilizar la función de restricciones incorporada en iOS, establecer límites de tiempo de uso, utilizar aplicaciones de terceros o aprovechar las funciones de bloqueo de aplicaciones de algunas aplicaciones populares. Al tomar medidas para bloquear aplicaciones no deseadas, puedes tener una experiencia más segura y controlada en tu iPhone.

About the author

Author description olor sit amet, consectetur adipiscing elit. Sed pulvinar ligula augue, quis bibendum tellus scelerisque venenatis. Pellentesque porta nisi mi. In hac habitasse platea dictumst. Etiam risus elit, molestie 

Leave a Comment